DishDrawer™™ 'A' Fault Codes for DD*A & DD*C Models

If the display is showing an ‘A’ fault code, follow the steps below to try and fix the issue. If the fault persists, note down the code before disconnecting the dishwasher from the water and power supplies.

Not sure which model you have?Click here to Find where your Model Number is located.

Fault Code	Possible Cause	*DDA & DDC Models*
A1	Water Supply Fault Ensure the water supply is turned on. Press once to stop the beeping, and then again to clear the fault. Press to resume the wash program.
A3	Drawer Cannot Drain Ensure the drainage hose and connection to pipes are not blocked. Press 'Start Pause' once to stop the beeping, and then again to clear the fault.