Fault Code
RS6009V2R1 RS6009V2RT1 RS2435V2RT1 RS2435V2R1 26701 26700 26704 26705 26709 26708
| Fault Code | Possible Cause | Solution |
| F1 | On the last power-up, the control Module failed self-test. | You will need a Service Technician to assist with this - Click Here to schedule a visit. |
| F3 | Temp sensor fault. | You will need a Service Technician to assist with this - Click Here to schedule a visit. |
| F4 |
| Temp sensor fault. |
| F5 | Temp sensor fault. |
| F6 | Temp sensor fault. |
| F7 | Temp sensor fault. |
| F8 | Temp sensor fault. |
| F9 | Temp sensor fault. |
| F10 | Temp sensor fault. |
| F11 | The current measured for the fans or heaters is higher than expected. | You will need a Service Technician to assist with this - Click Here to schedule a visit. |
| F12 | The current measured for the fans or heaters is higher than expected. |
| F13 | Heater fault. | You will need a Service Technician to assist with this - Click Here to schedule a visit. |
| F14 | Heater fault. |
| F15 | Fan fault. | You will need a Service Technician to assist with this - Click Here to schedule a visit. |
| F16 | Fan fault. |
| F17 | Fan fault. |
| F18 | Fan fault. |
| F30 | The control module and display product type do not match. This happens when the controller and display are out of sync. | You will need a Service Technician to assist with this - Click Here to schedule a visit. |
| F31 | There is a communication issue somewhere between the display and the controller. | You will need a Service Technician to assist with this - Click Here to schedule a visit. |
| F50 | One of the sensors has an issue. | You will need a Service Technician to assist with this - Click Here to schedule a visit. |
| F51 | One of the sensors has an issue. |
| F52 | One of the sensors has an issue. |
| F53 | One of the sensors has an issue. |
| F54 | One of the sensors has an issue. |
| F55 | One of the sensors has an issue. |
| F56 | The condenser fan is drawing more current than is expected. Either the wiring is shorted or the fan is faulty. | You will need a Service Technician to assist with this - Click Here to schedule a visit. |
| F57 | The condenser fan is drawing more current than is expected. Either the wiring is shorted or the fan is faulty. |
| F58 | A heater is drawing less current than expected. Either the heater or wiring is open circuit or the heater is not within limits. | You will need a Service Technician to assist with this - Click Here to schedule a visit. |
| F59 | There is a communication issue somewhere between the display and controller. | You will need a Service Technician to assist with this - Click Here to schedule a visit. |
| F66 | The throat heater is drawing more current than expected. Either the heater or wiring is short circuit. | You will need a Service Technician to assist with this - Click Here to schedule a visit. |
| F67 | The humidity Sensor is not responding. | You will need a Service Technician to assist with this - Click Here to schedule a visit. |