Possible Causes

• Dishes are loaded incorrectly so water can't drain off them
• Unsuitable wash program selected for the load
• Rinse aid is low or empty, so water is staying on dish surfaces when you unload the dishwasher

How to Fix

Load items effectively

• Space items evenly so they don't overlap or nest together.
• Place cups and containers upside down so they don't fill with water.
• Check there are no items that will prevent the spray arm from rotating.

Select the right cycle

• For everyday loads, use Auto or Normal cycles.
• For heavily soiled items, use Heavy or Intensive.
• Use EXTRA DRY or DRY+ modifiers to extend the drying phase.

Refill rinse aid if the indicator is on

1. Open the dishwasher and check the rinse aid indicator. Only refill rinse aid if the indicator is on.
2. To refill, open the rinse aid dispenser and carefully fill to the MAX line with quality rinse aid.
3. Wipe up any spills immediately - rinse aid spills can cause excess foaming.
4. Close the dispenser.

Helpful Tips

• Unload the bottom dish rack first to prevent water from upper items dripping onto dry items.
• Remove and air dry plastic items as they tend to retain moisture, and allow hot dishes to cool before unloading the dishwasher.
• Clean the filter regularly so the dishwasher can drain well.