Possible Causes

• Power or gas supply is turned off
• Burner rings or caps not fitted correctly after cleaning
• Ignitors are dirty or wet
• Injector is blocked

How to Fix

1. Check that the cooker is switched on at the wall and connected to the power supply.
2. Check that the gas supply valve is turned on and that gas is flowing to the cooker.
3. Remove the burner rings and caps. Make sure they are clean, dry, and fitted flat. Refit them correctly before trying to relight.
4. Clean the ignitors gently with a toothbrush and methylated spirits. Allow them to dry completely before using the burner.
5. Remove the injector and use a fine needle to clear any blockage. Refit the injector and burner parts securely, then turn the control dial again.
6. If the burner still does not light, book a service repair.

Helpful Tips

• You should hear gas flowing when you turn the dial ó if not, recheck the supply.
• Always ensure burner parts are fitted flat after cleaning to ensure good ignition.
• Clean ignitors regularly to maintain reliable lighting.
• Have your model details ready when you book a service to speed up support.