Possible Causes
- Incorrect detergent type or amount for your water hardness
- Wash cycle selection not suitable for the load type
- Dishes not loaded correctly
- Filter and spray arm need to be cleaned
How to Fix
- Use good quality powdered detergent or tablets to clean dishes and filters.
- Select the most appropriate cycle for each load: HEAVY for baked-on food, MEDIUM for regular loads, and ECO or LIGHT for lightly-soiled dishes.
- Space items evenly so water from the spray arm can reach them, and check nothing is obstructing the spray arm.
- Clean the filter and spray arm regularly to remove grease and food buildup so water can run freely through.
Helpful Tips
- Remove large food scraps before loading but don't pre-rinse. This uses more water and reduces the effectiveness of the detergent.
- Run a cleaning cycle every few months to remove grease and build-up. Use a dishwashing cleaner, follow label instructions, and run on a HEAVY or HEAVY SANITISE cycle.
- Use a water softener if you live in a hard water area, and descale your dishwasher to remove mineral buildup.
- If your DishDrawer still isn't cleaning properly after these steps, book a service repair.