Ventilation Spare Parts

Aluminium Filter for Rangehood.

Dimensions: 335 x 267.

Suits Models: RH1216CR, RH900CM, RH1202CR, RH600CR, RH900CR, RH900C, RH900CM, RH900CB, EC90I, HC60PCHPX1, HC90PCHPX1, HC120PCHPX1.

Roof Vent Kit 150mm for Rangehood.

Deflect-o 150mm Roof venting kits are universal fitting and ideal for ventilation options requiring bends to navigate around obstacles within the roof cavity Supplied with the most efficient type of flexible ducting - Semi-Rigid aluminium ducting holds its full diameter and form when bent into shape, and also offers a superior temperature range to that of flexible foil type ducting.

Ducting expands to a straight length of 3000mm and should be extended in sections from the centre - out to each end. The Roof Mushroom Cowl is a far superior option to the common type cowl - offering greater protection from birds, rain and rust.

Installation Note: Please read installation instructions that are supplied with your Rangehood before installing these parts, assistance maybe required from a qualified tradesperson.

****This replaces Part PD-RHK150T****

Charcoal filters are designed to remove grease and odours from cooking vapours, prior to the cleansed air re-entering the kitchen (when the rangehood is in recirculating mode). Charcoal filters are disposable items and it is recommended that these should be replaced every two months depending on use.

Suits Models beginning with: HS60C, HS90C.

Bulb for Rangehood.

Suits Models: HC60PCHPX1, HC90PCHPX1, HS60C, HS90C.

Deflect-o 150mm Wall venting kits are universal fitting and ideal for ventilation options requiring bends to navigate around obstacles within wall or roof cavities.

Supplied with the most efficient type of flexible ducting - Semi-Rigid aluminium ducting holds its full diameter and form when bent into shape, and also offers a superior temperature range to that of flexible foil type ducting.

Ducting expands to a straight length of 3000mm and should be extended in section from the centre - out to each end.

The Wall Vent consists of a calcium filled, polypropylene plastic with UV stabilisers. The gravity louvres allow air to exhaust, and shut to prevent the entry of back drafts, birds and vermin when not in use. Installation Note: Please read installation instructions that are supplied with your Rangehood before installing these parts, assistance maybe required from a qualified tradesperson.

****This part replaces PD-RHK150W****

Deflect-o 125mm Wall venting kits are universal fitting and ideal for ventilation options requiring bends to navigate around obstacles within wall or roof cavities. Supplied with the most efficient type of flexible ducting - Semi-Rigid aluminium ducting holds its full diameter and form when bent into shape, and also offers a superior temperature range to that of flexible foil type ducting.

Ducting expands to a straight length of 3000mm and should be extended in section from the centre - out to each end. The Wall Vent consists of a calcium filled, polypropylene plastic with UV stabilisers. The gravity louvres allow air to exhaust, and shut to prevent the entry of back drafts, birds and vermin when not in use.

Note: Please read installation instructions that are supplied with your Rangehood before installing these parts, assistance maybe required from a qualified tradesperson.

Deflect-o 125mm Roof venting kits are universal fitting and ideal for ventilation options requiring bends to navigate around obstacles within the roof cavity. Supplied with the most efficient type of flexible ducting - Semi-Rigid aluminium ducting holds its full diameter and form when bent into shape, and also offers a superior temperature range to that of flexible foil type ducting.

Ducting expands to a straight length of 3000mm and should be extended in sections from the centre - out to each end. The Roof Mushroom Cowl is a far superior option to the common type cowl - offering greater protection from birds, rain and rust. Also available in 150mm - Refer model RHK150T. Installation Note: Please read installation instructions that are supplied with your Rangehood before installing these parts, assistance maybe required from a qualified tradesperson.

Note: This part replaces PD-RHK125T.

Aluminium Filter for Rangehood.

Suits Models: HC60PLX4 & HC60BLX4.

Aluminium Rangehood filter.

Dimensions: 508mm x 172mm.

Suits Models: SB600 RH600SO and some models starting with HS60 (see dimensions above).

Note: Does not suit HS60CSX3, HS60CSRX3 & HS60CIWX3. Filters are sold individually.

Lamp Holder for Rangehood.

Suits Models: HC120BCXB2, HC120DCXB1, HC60BCXB2, HC60DCXB1, HC90BCXB2, HC90DCXB1, HC90PCB1, HC90PCR1, HC90PCW1, HC90PCX1, HP60IDCHX2, HP90IHCB3, HS60LRX4, HS60LXW4, HS60XW4, HS90X4, HT90DBX1, HT90GHB2.

Recirculation Diverter for Rangehood.

Suits Models: HC90DCXB3.

Metallic Filter for Rangehood. LGT.

Suits Models beginning with: HP60IDCHX2, HP60IHCB3, HP90IDCHX2, HP90IHCB3.